|
Frequency response |
± 2dB of RIAA, 10Hz to
60kHz: 3dB points below 0.5Hz and above 300kHz. |
|
Distortion (THD) |
.002% at 1.0V RMS 1kHz BAL
output. |
|
Noise & hum |
0.22µV equivalent input
noise (High Gain) (65dB below 0.1mV 1kHz input). |
|
Gain |
Selectable 51 dB (Low), 74
dB (High) at 1 kHz BAL; 45 dB (Low), 68dB (High) at 1 kHz SE.
(MC & MM compatible). |
|
Input impedance |
47K ohms and 100pF SE.
Additional selectable loads: 1000, 500, 200, 100, 50 ohms and
Custom. (Custom loading value is factory set at 47K ohms unless
specified otherwise.) |
|
Output impedance |
200 ohms SE, 400 ohms
balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms
minimum and 2000pF maximum.) |
|
Maximum inputs |
250mV RMS at 1kHz (680 mV
RMS at 10kHz). |
|
Rated outputs |
0.5V RMS 10Hz to 20kHz,
100K ohm load (output capability is 80V RMS BAL output at ½% THD
at 1kHz, 40V SE.) |
|
Power supplies |
Electronically-regulated
low and high voltage supplies. Line regulation better than .01%. |
|
Tube complement |
(4) 6H30 dual triodes, plus
(1 each) 6H30, 6550C in power supply. |
|
Power requirements |
100-135VAC 60Hz (200-270VAC
50/60Hz) 140 watts maximum. 2W standby. Line fuse 5A SLO BLO
(T2A SLO BLO 230V). |
|
Other |
Buttons: Front (6) Power,
Input, Gain, Load, RIAA, Mute. Remote adds "hours" and
"Display".
Phono equalization: (Selectable) RIAA, Columbia, Decca.
Polarity: Non-inverting. |
|
Dimensions |
19" (48 cm) W x 7" (17.8
cm) H (standard rack panel) x 15.5" (39.4 cm) D. Handles extend
1.5" (3.8 cm) forward of front panel. |
|
Weight |
27 lbs. (12.3 kg) Net; 38
lbs. (17.3 kg) Shipping. |
