Joseph Audio - Cinergy 6.1XL

R.R.P. FROM $1,800.00

Manufacturer's Website

Ever notice how home theatre speakers can sound so different from one another, even when they are the same brand?

Typical speakers allow the sound from the woofers and tweeters to interact with one another over a broad part of the range, so a horizontal array can never quite sound the same as a vertical one -- even when the same elements are used! Thanks to the patented Infinite Slope crossover, the Cinergy 6.1XL actually provides the acoustic match so vital to proper cinema sound, even if you turn it on its side. The sound is clear everywhere, so the whole family can enjoy the movie, regardless of where they sit in the room.

The Cinergy 6.1 XL is available from $1499 each in Oak (shown) , Black, Maple, Rosewood (shown) or Cherry finish.
 

SPECIFICATIONS:

Sensitivity: 88 dB SPL, with 2.83 volts RMS @ 1 meter, 4 pi (anechoic).

Sensitivity combined with impedance indicates how much amplifier power is required for the loudspeaker to play at satisfying volume levels. When comparing this spec to low impedance (4 ohm) designs, you must add 3 dB to the figure, since 4 ohm loads draw twice the current from the amplifier, providing the illusion of greater sensitivity, while placing more stress on the amplifier’s power supply. The moderate sensitivity of the Cinergy 6.1XL indicates that even small amplifiers can achieve realistic levels in all but the largest rooms.

Impedance: 8 ohms nominal, 6 ohms minimum.

System impedance indicates whether the speaker presents a "hard" or "easy" load on the amplifier. True 8 ohm speakers are less amplifier and cable sensitive, and partner well with a broader range of amplifiers, including tube designs.

Crossover: 2-way Patented Asymmetrical Infinite Slope Crossover at 2 kHz. Additional filtering on second woofer improves midrange definition.

Constructed of specially selected components, woofer and tweeter crossover circuits are physically independent. Provision for bi-amping or bi-wiring. Each network is tested and calibrated to a high degree of precision, resulting in a virtually perfect match to the original design prototype.

The steep filter slopes ensure good acoustical behavior in the crossover regions, with a minimum of acoustical interference, along with low distortion and wide dynamic range. Driver acoustic responses are in-phase throughout the crossover region.

Frequency Response:

The Cinergy 6.1XL delivers a very smooth and even response over a very broad listening window. Unlike conventional low order crossover designs, the speaker retains its sonic balance over a wide angle both vertically and horizontally. This results in a higher level of fidelity than a simple on axis measurement can reveal.

Listening window response: within 2dB from 40 Hz to 20 kHz

Dimensions and weight: 8" (203.2 mm) H x 22" (558.8 mm) W x 14 " (355.6 mm) D.

Shipping weight approx. 48 lbs. (21.77 kg) Each