|
Important: The TT
PSU can only be used with the P3-24, P5 and P7
turntables. It is not compatible with any other
Rega or manufacturers turntables.
The all new TT PSU and motor anti-vibration
circuit is a combination of the innovative P9
power supply along with an improved P25
anti-vibration motor drive feeding the P9 24V AC
synchronous motor. The TT PSU uses a remote
"wall wart" transformer therefore keeping the
sources of hum & noise well away from sensitive
parts such as the cartridge and phono leads.
The compact TT PSU uses exactly the same high
stability crystal locked low distortion sine
wave generator as is used in the heart of the P9
power supply. This, along with an efficient
drive amplifier fed from stabilised DC power
supply, generates a 24Volt AC balanced signal of
less than 0.05% distortion, which is completely
unaffected by any changes in the mains/line
voltage and conditions. This then drives the
turntables anti-vibration circuit, which is
situated beneath the turntable.
The drive voltage for the motor is run along the
power lead to the turntable motor, which also
carries the 33/45-RPM DC relay control voltage
used to activate the anti-vibration circuit.
|
|
Features... |
-
The TT PSU can be used in
conjunction with the P5
Turntable as an optional
upgrade.
Finishes available:
Silver satin metal finish
Black satin metal finish
|
|
