|
Ortofon Verto Review
by
James Leahy
Introduction
The dedicated Ortofon Verto
transformer for low output MC cartridges is just what the Doctor
ordered for phono stages that do not have enough gain or do not have
MC inputs altogether. Worried about quality losses or compromises in
soundstage from using such a device? Read on and see what our
findings were for such a product that promises so much to the low
output MC enthusiast.
Using MC cartridges under
0.500mV output requires the use of a dedicated high gain MC phono
stage and with some of the best MC cartridges getting down to
extremely low outputs of 0.150mV even more gain is required.
Providing two setting for
different cartridges; Configuration A for 5-50ohms (24dB gain) and
Configuration B with <10ohms (30dB gain). This covers most of
anything that you would want to consider using with your rig.

A dynamic and transparent passive transformer that
will add to your enjoyment of every MC cartridge that required more
gain. Packaging is awesome like all Ortofon's products are.

The stunning build quality that Ortofon have
lavished on the Verto is most welcome and expected for the price.

Simple and uncomplicated in it's design but not in
it's performance.

The quality of the parts used by Ortofon reflects
it's price and it's intended use by their discerning customers.
Sonic
Evaluations
This review was done using
Dire Straits, 'BROTHER IN ARMS' - What must be one of the all time
classic albums from the 80's and one that was chosen to launch CD
into the public arena (Mercury Records, Re-Mastered 2006). What
better album to see what the 20th anniversary 180g special vinyl
pressing from Mercury Records is capable of. Connecting the Audio
Research SP16 and using only the MM phono section in this unit I was
most keen to see how the Verto would perform and if there was any
loss compared to a dedicated MC phono stage.
I, like so many other MC phono
cartridge enthusiasts' have had a love/hate relationship with the
low output that the higher end models provide. What is one to do?
Simple, get a phono stage with sufficient gain for your cartridge,
or use a very high quality Ortofon Verto step-up transformer to do
the business as well as any device could do.
For the Verto to be suitable
in a high ended Hi-Fi system the soundstage would have to be
maintained and not suffer any compression and/or rolled off topend
that is most common and typical with low quality step-up MC
transformers on the market. This was certainly the case with old
fashioned cheaper ones I have previously tested in both customers
systems and my own.
The Ortofon Verto, when
listening to 'So Far Away' was very dynamic and faithful to the
upper frequencies, a major sticking point and huge let down with
most of this competitors in the market place. The overall character
of the tone is not compromised and remains fully transparent far
into the depths of micro detail in each sub layer of sound that the
engineer intended.
The Verto is so neutral to the
original signal because it has no active electrical circuits that
may introduce corruption of the sound. The result is a pure and
unaltered amplifier signal with the full character of your MC
cartridge faithfully intact to the end. I am thoroughly pleased that
Ortofon have taken the trouble and effort to invest in MC technology
where others have failed.
Ortofon currently only have
one MC step-up transformer in their range because with a company
history as long and prestigious as theirs, they do not wish to make
a compromise in this most critical part of the signal chain. The
price of the Verto is justifiable and can even be considered cheap
when you take into account what a high quality turntable, MC
cartridge and phono stage would cost. Ortofon have really managed to
achieve here what many have said for years could never be done with
MC step-up transformers. This proves that just sometimes, if you
through enough money at a problem, a solution will emerge.
Associated review Equipment
-
Amplifier:
Audio Research VT 200 Mk.I
-
Line Stage: Audio Research
REF3
-
Phono Stage:
Audio Research SP16
-
Speakers:
Martin Logan Odyssey
-
Cables:
Furutech
-
Turntable:
Rega P7
-
Subwoofer: Velodyne HGS-15
|