|
Audio Research D125
SOLD
$3,500.00
JUL 2009
Dr Hi-Fi's Review
Features include: Servo for auto balance of plate
currents between output tube push & pull pairs; Front panel LED indicators and
adjustment controls for left and right channel output tube plate current; Low
current LED indicator for each output tube viewable through cover; "Tube Saver"
circuit to protect output tubes from abnormal conditions or input overloads (eg.
DC); Twin subsonic cooling fans for temperature control and increased life of
output tubes.










Specifications
|
Power output |
110 Watts per channel |
|
Power bandwidth |
10 Hz to 80 KHz (-3 dB points) |
|
Frequency response |
|
|
Input sensitivity |
0.7 Volts for rated output |
|
Input impedance |
100K ohms |
|
Output taps |
4, 8 and 16 ohms |
|
Output regulation |
Approximately 0.4 dB 16 ohm load to
open circuit |
|
Overall negative feedback |
21 dB |
|
Damping factor |
20 |
|
Distortion |
Less than 0.4% total harmonic
distortion at 110 watts (typically below .005% at 1 watt) |
|
Slew rate |
20 Volts/µs |
|
Rise time |
3 µs |
|
Hum & noise |
90 dB below rated output |
|
Power supply energy storage |
280 joules |
|
Power requirements |
|
|
Tube complement |
(4 matched pairs) 6550 |
|
Other |
|
|
Dimensions |
19" W x 8 3/4" H x 16.5" D |
|
Weight |
84 lbs. Net, 95 lbs. Shipping |
|