|
Frequency response |
± .5dB, 2Hz to 30kHz at rated
output. -3dB points below 0.3Hz and above 80kHz. |
|
Distortion (THD) |
Less than .01% at 2V RMS balanced
output |
|
Noise & hum |
25µV RMS residual IHF weighted
balanced noise output with gain control at minimum, 98dB below 2V RMS
output |
|
Gain |
Main output: 12.5dB balanced, 6.5dB
SE |
|
|
Tape output: 0dB |
|
Input impedance |
200K ohms balanced, 100K ohms SE |
|
Output impedance |
600 ohms balanced, 300 ohms SE Main
(2), 40K ohms minimum load and 1000pF maximum capacitance. |
|
Output polarity |
|
|
Maximum input |
14V RMS maximum balanced, 7V RMS SE |
|
Rated outputs |
2V RMS (1V RMS SE) into 200K ohm
balanced load (maximum balanced output capability is 30V RMS at less
than 1% THD at 1kHz |
|
Power supplies |
Electronically regulated low and
high voltage supplies. Automatic 30 second warmup mute. Automatic
brown-out mute. |
|
Tube complement |
(4) 6922/ECC88 dual triode. (Vacuum
tube audio circuit, solid-state power supply) |
|
Power requirements |
100-135VAC 60Hz (200-270VAC
50/60Hz) 35 watts maximum |
|
Other |
Inputs: SE1, SE2, SE3, SE4, Bal,
Direct (Bal) and Monitor (SE) |
|
|
Outputs: 2 Main Bal, 1 Main SE, 1
Record SE |
|
Dimensions |
19" (48 cm) W x 5.25" (13.3 cm) H
(standard rack panel) x 10.5" (26.7 cm) D. Handles extend 1.50" (3.8 cm)
forward of the front panel. |
|
Weight |
11.6 lbs. (5.3 kg) Net; 20 lbs.(9.1
kg) Shipping. |
