|
Frequency response |
Line: +0-1dB, 1Hz to 60kHz
at rated output. -3dB points below 0.5Hz and above 100KHz |
|
|
Phono: ±0.3dB of RIAA, 10
Hz to 20KHz |
|
Distortion (THD) |
Less than .007% at 2V RMS
single ended output |
|
Noise & hum |
Line: 15µV RMS IHF weighted
at main output with volume low (96dB below 1V RMS output). |
|
|
Phono: 0.9µV RMS IHF
weighted equivalent input noise, shorted input (67dB below 2mV
RMS 1KHz input). |
|
Gain |
Main output line: 11.5dB
Single Ended Processor: 0dB |
|
|
Phono: 55dB at 1 KHz |
|
|
Record output, line: 0dB.
Phono: 43.5dB |
|
Input impedance |
50K ohms line, 47K ohms
Phono, (1 to 6Mv High output cartridge recommended) Inputs (6):
phono, DC, tuner, video, aux, processor, (Single Ended RCA
connectors). Model SP16L has no phono input. |
|
Output impedance |
260 ohms Single Ended main;
20K ohms minimum load and 1000 pF maximum capacitance. Outputs
(3): 2 main, 1 record (Single Ended RCA connectors). |
|
Output polarity |
Non inverting (Any input or
output). |
|
Maximum inputs |
Line: 3.5V RMS Single
Ended. |
|
|
Phono: 25 mV RMS 1KHz, 50mV
RMS 10KHz |
|
Rated outputs |
2V RMS Single Ended into
100K load. Maximum output 15V RMS at 1% THD at 1kHz. |
|
Power supplies |
Electronically regulated
low and high voltage supplies. Automatic 30-sec.
warm-up/brown-out mute. Line regulation better than .01%. |
|
Tube complement |
(6) 12AX7EH dual triodes |
|
Power requirements |
100-135VAC 60Hz (200-270VAC
50/60Hz) 36 watts. |
|
Other |
Push buttons: Volume up,
volume down (70 steps, 20 LED indicators), Input, Processor,
Mute, Power. All functions on IR remote control.
Remote 12V out: Line: 12V DC at 100 mA max for system power
control, i.e. to turn on power amplifiers and other equipment
and full remote control on all functions. |
|
Dimensions |
17.75" (45 cm) W x 5.2"
(13.2 cm) H x 10.0"(25.4 cm) D. Rear connectors extend 0.6" (1.5
cm). |
|
Weight |
12.6 lbs. (5.7 kg) Net; 20
lbs. (9.1 kg) Shipping. |
