| Frequency response |
Line: +0-1dB, 0.6Hz to
80kHz at rated output. -3dB points below 0.3Hz and above 120KHz.
Phono: ±0.3dB of RIAA, 10 Hz to 20KHz |
| Distortion (THD) |
Less than .005% at 2V RMS
output. |
| Noise & hum |
Line: 12µV RMS IHF
weighted at main output with volume low (104dB below 2V RMS
output).
Phono: 0.3µV RMS IHF weighted equivalent input noise, shorted
input (76dB below 2mVRMS 1KHz input). |
| Gain |
Main output line: 11.1dB
Processor: 0dB.
Phono: 58dB at 1 KHz.
Record output, line: 0dB. Phono: 47dB. |
| Input impedance |
60K ohms line, 47K ohms
Phono, (0.7 to 7mV High output cartridge recommended). |
| Output impedance |
210 ohms Single Ended
main; 20K ohms minimum load and 1000 pF maximum capacitance.
Record output 60K ohms minimum load and 100pf maximum
capacitance. |
| Output polarity |
Non inverting |
| Maximum inputs |
Line: 9V RMS.
Phono: 40mV RMS 1KHz, 100mV RMS 10KHz. |
| Rated outputs |
2V RMS into 100K load.
(Maximum output 15V RMS at 1% THD at 1kHz.) |
| Power supplies |
Electronically regulated
low and high voltage supplies. Automatic 25 sec.
warm-up/brown-out mute. Line regulation better than .01%. |
| Tube complement |
(2) 6H30 dual triodes |
| Power requirements |
100-135VAC 60Hz
(200-270VAC 50/60Hz) 39 watts. |
| Other |
Inputs (6): phono, CD,
tuner, video, aux, processor. Model SP17L has no phono input.
Outputs (3): 2 main, 1 record (Single Ended RCA connectors).
Push buttons: Volume up, volume down (102 steps, 20 LED
indicators), Input, Processor, Mute, Power. All functions on IR
remote control. |
| Dimensions |
19.0" (48 cm)
W x 5.2" (13.2 cm) H x 10.0"(25.4 cm) D. Rear connectors extend
0.6" (1.5 cm). Front handles are optional. |
| Weight |
12.6 lbs. (5.7 kg) Net; 20
lbs. (9.1 kg) Shipping. |